Clevo p157sm, Руководство по обслуживанию, Страница: 46 / 126

Disassembly
2 - 22 Removing and Installing the Processor
2.Disassembly
Processor Installation Procedure
1. Insert the CPU , pay careful attention to the pin alignment ( Figure 18a ), it will fit only one way (DO NOT
FORCE IT!), and turn the release latch towards the lock symbol ( Figure 18b ).
2. Remove the sticker ( Figure 18c ) from the heat sink unit (if it is a new unit).
3. Insert the heat sink unit as indicated in Figure 18c .
4. Tighten the CPU heat sink screws in the order
,
,
&
(the order as indicated on the label and Figure
18d ).
5. Replace the CPU fan, component bay cover and tighten the screws ( page 2 - 20 ).
A
B
C
D
1 2 3 4
c.
b. d.
B
a.
C
D
1
4
2
Note
:
Tighten the screws in the order 1-2-
3-4 as indicated on the label.
3
A
Figure 18
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink unit and in-
sert the heat sink.
d. Tighten the screws.

A. CPU
D. Heat Sink
• 4 S crews