Clevo NL40CU, Руководство по обслуживанию

Страница: 35 / 88

Disassembly
Removing and Installing the M.2 SSD Module 2 - 11
2.Disassembly
Removing and Installing the M.2 SSD Module
M.2 SSD Removal Procedure
1. Turn off the computer, turn it over to remove the battery ( page 2 - 5 ).
2. The M.2 SSD module will be visible at point on the mainboard ( Figure 5a ).
3. Remove the screw ( Figure 5b )
4. The M.2 SSD module ( Figure 5c ) will pop-up, and you can remove it from the computer.
5. Reverse the process to install a new module (do not forget to replace all the screws and bottom cover).
1
2
3
b.
c.
a.
2
3
1
3

Thermal Pad
Make sure to place the thermal pad’s adhesive side down on the
module’s surface as illustrated. Insert the module with the thermal
pad facing the mainboard.

3.M2 SATA Module
• 1 Screw
Figure 5
M.2 SSD Module
Removal
a. Locate the M.2 SSD.
b. Remove the screw.
c. The M.2 SSD module
will pop up.