manualshive.com logo in svg

Clevo N870, Руководство пользователя, Страница: 67 / 290

Поделиться
Скачать
Clevo N870 Скачать руководство пользователя страница 67

Bottom View - Model B 1 - 33

Quick Start Guide

1

Bottom View - Model B

Figure 1 - 23

Bottom View 

Model B

1. Battery
2. Fan Outlet/Intake
3. Speakers

Bottom Cover Removal 

Warning

Do not remove any cover(s)
and /or screw(s) for the pur-
poses of device upgrade as
this may violate the terms
of your warranty.

If you need to replace/re-
move the hard disk/RAM/
optical device etc., for any
reason, please contact your
distributor/supplier for fur-
ther information.

1

Battery Information

Always completely discharge, then fully charge, a new battery before using it. Completely
discharge and charge the battery at least once every 30 days or after about 20 partial dis-
charges.

2

2

3

3

Overheating

To prevent your comput-
er from overheating
make sure nothing
blocks the vent(s)/fan in-
take(s) while the com-
puter is in use.

Содержание N870



































































































































































































































































































Отзывы:

Нет отзывов