Disassembly
2 - 6 Removing the Hard Disk Drive
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) or parallel (PATA) hard disk drives (see
“Changing Serial and Parallel Hard Disk Cables” on page 2 - 8
) with a height of 9.5mm (h). Follow your operating
system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s
Manual
), when setting up a new hard disk.
1.
Turn
off
the computer, turn it over and remove the battery (
).
2.
Locate the hard disk/memory bay cover
.
3.
Remove screws
-
and remove the bay cover
.
Figure 2 - 2
HDD Assembly
Removal
a. Locate the HDD bay cov-
er and remove the
screws.
b. Lift the cover off the com-
puter.
1
2
5
1
1. HDD/Memory Bay
Cover
•
4 Screws
HDD System Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the
internet, download the lat-
est application and hard-
ware driver updates for the
operating system you plan
to install. Copy these to a
removable medium.
a.
1
4
5
2
3
1
b.
Содержание M400A
