manualshive.com logo in svg

Clevo 3X00C, Руководство пользователя, Страница: 74 / 101

Поделиться
Скачать
Clevo 3X00C Скачать руководство пользователя страница 74

7 - 1

Chapter 7:  Installing drivers

Chapter 7:  Installing drivers

This chapter provides step-by-step instruction for installing device

drivers and utilities, for more detailed information please refer to your
operating system's manual or the product manual supplied with the device
you wish to install.  The information here has been designed for users with
basic computer knowledge though inexperienced users may also find this
section helpful.

This chapter includes:

Installing Windows 98 SE
Installing Drivers in Windows 98 SE
Installing Drivers in Windows NT 4.0

Getting you new notebook computer ready:

1. Use a bootable floppy disk to start the system.
2. Run the FDISK utility from DOS to create a bootable partition  (See
the DOS manual for operational details.)
3. Format the hard disk.  Use the command "Format C:/S" to create a
bootable hard disk and create a system boot file. (C:/S copies system
files to the formatted disk)
4. Run the program CDINST.COM from the "CD-ROM Drive Installa-
tion Diskette"  This will install a CD-ROM driver device automatically.
5. Restart the system.

Installing Windows 98 SE (For Reference)

1. Start DOS.
2. Insert the Windows 98 CD-ROM.
3. Type "setup", then press [Enter].
4. Follow the instructions on the screen and choose the recommended
option.

Содержание 3X00C






































































































Отзывы:

Нет отзывов