manualshive.com logo in svg

Clevo 3X00C, Руководство пользователя, Страница: 100 / 101

Поделиться
Скачать
Clevo 3X00C Скачать руководство пользователя страница 100

Notice

The company reserves the right to make any updates, revisions, or

changes to the information contained herein as and when deemed
necessary.  The company is under no obligation to notify any purchaser or
end-user of such actions in advance or afterwards.
2000

Trademarks

IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of

International Business Machines Corporation.

Intel, Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse

are registered trademarks of Microsoft Corporation.

Sound Blaster Pro is a trademark of Creative Labs, Inc.

SystemSoft is a registered trademark of SystemSoft Corp.

Other brand and product names are trademarks of their respective

companies.

Copyright

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners.  Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation.  Reverse engineering or disassembly is prohibited.

Содержание 3X00C






































































































Отзывы:

Нет отзывов