Clever airpro, Руководство пользователя

Страница: 8 / 12

8
F
G
E
Attaching the Paddle End
1. Locate the locking pin to the end of
the aluminium paddle body (F).
2. Press the locking pin down and insert
the pole (F) into the end of the paddle
fin (E)
3. Align the locking pin with it’s respective
hole to lock the paddle in place.
Attaching the Adjustable Paddle Grip
4. Locate the locking clasp to the end of
the aluminium paddle body (F) and
pull up to release.
5. Insert the adjustable paddle grip (G)
into the end of paddle body (F) and
align the number indication hole with
the recess to set the desired length.
6. Push the locking clasp down fully to
lock the grip in place.
F
5
4
ASSEMBLING THE iSUP PADDLE
ATTACHING THE ANKLE LEASH
Wherever possible we advise using a suitable
ankle leash (C) when using your iSUP.
1. Locate the ankle leash D-Ring (VI) and
insert elastic end of ankle leash through.
2. Open elastic loop and feed entire leash
through and pull tight.
3. Open Velcro and wrap around ankle firmly
but ensuring not to over tighten.
ASSEMBLING THE ACCESSORIES
TIGHTENING THE HIGH PRESSURE VALVE
Over time it is possible that the high pressure
inflation valve (VII) may become loose.
As part of the repair kit (K) we supply a valve
wrench which should be used to tighten the
valve to maintain its air seal.
1. Open the high pressure valve (VII) by
turning the valve cap (1) 90 ° clockwise.
2. Insert the valve wrench into the high
pressure valve as shown.
3. Firmly grip the outside of the valve and
turn wrench clockwise until fully tightened.
Note: We advise that the valve should not be
unscrewed fully unless absolutely necessary.
1
VII
1
3
2
F
E
6
G