www.cleveracoustics.co.uk
ZM 84 Audio Mixer
User Manual
6
Operating instructions
9. Zone 2 Master Volume Controls
The Zone 2 master output volume is adjustable. Turn the level control anti clockwise to the lowest
setting, or turn clockwise to adjust to the highest setting.
10. Power Indicator LED
The Power LED will illuminate to indicate the zone mixer is powered on. If the power LED
is not illuminated, check first the position of the on/off switch and then check the mains supply
(including fuse).
11. MIC/Line 1-4 Signal & Overload LED Indicators
Each input channel features visual indication of signal present, and signal overload. To indicate when
a signal is inputted into a channel, the green signal LED will flash or if the signal is strong the LED will
illuminate fully. When the input signal is too high for the pre-amplifier, the signal overload LED will flash
red, indicating a reduction in gain may be required to prevent signal distortion or system damage.
For MIC/Line inputs 1-4 the gain reduction can be made using the gain potentiometer on the rear panel,
for AUX 1-4 the gain reduction must be made at source or using an in-line attenuator.
12. MIC/Line 1-4 Volume Controls
Each of the MIC/Line volumes are adjustable. Turn the level control anti clockwise to the lowest setting,
or turn clockwise to adjust to the highest setting.
13. AUX 1-4 Signal & Overload LED Indicators
Each input channel features visual indication of signal present, and signal overload. To indicate when
a signal is inputted into a channel, the green signal LED will flash or if the signal is strong the LED will
illuminate fully. When the input signal is too high for the pre-amplifier, the signal overload LED will flash
red, indicating a reduction in gain may be required to prevent signal distortion or system damage. For
AUX 1-4 channels the gain reduction must be made at the audio source or using an in-line attenuator.
14. AUX 1-4 Volume Controls
Each of the AUX volumes are adjustable. Turn the level control anti clockwise to the lowest setting,
or turn clockwise to adjust to the highest setting.
15. Power Switch
On/Off control for the zone mixer.
16. AC Mains Power Input
240V~50Hz AC mains voltage input. This product falls under CLASS 1 and must have a protective earth
connection at all times.
17. Unbalanced Line Outputs – Record outputs 3-4
Unbalanced, 0dBu mono outputs for each of the two record outputs. Each zone output features a
female phono (RCA) connector. The output volume for the record outputs is fixed and is not altered by
the master volume control for the zone outputs.
