Clever Acoustics ZM 102, Руководство пользователя

Страница: 8 / 12

www.cleveracoustics.co.uk ZM 102 Audio Mixer User Manual
8
Operating instructions
Power On/Off Procedure
Prior to making any connection to the mains power or audio inputs/outputs, turn all level controls
counter clockwise to the “min” position and all tone (equaliser) controls to the mid (zero) point.
Switch on the zone mixer and any audio sources (MP3 players, CD players, Microphones etc) before
powering the systems amplifier ON. The last product to be switched on should be the power/slave
amplifiers to prevent any unwanted noise or potential damage to speakers or amplifiers. If you wish
to power off the system, turn the amplifier’s master volume control counter clockwise to the “min”
position before switching the amplifier OFF before any audio sources are switched off. By following this
procedure it will prevent acoustic shocks to the speakers or potential damage to system components.
After connecting all audio sources and powering on the system, adjust the level of each audio input,
select the zone routing in order to achieve the desired “mix” for each zone. Care should be taken
to when adjusting microphone input volumes and the master volume, adjust both of these in small
increment’s to avoid feedback (howl around). The goal is to achieve a clear balance between music
and voice ensuring announcements can be clearly heard.