www.cleveracoustics.co.uk
MA Z6 Series Mixer Amplifiers
User Manual
7
Operating instructions
Bluetooth Mode:
Press the MODE button until the display shows “bt”. Switch on Bluetooth on your audio playback
device, enable the search function and connect with “PA-02086”. Your device should now be enabled
for audio playback over Bluetooth. The buttons on the front panel and on the remote control may be
used to skip forward/backwards.
FM Tuner
Note: Prior to operation, the antenna should be connected on the rear panel to provide optimum
RF reception.
To access the FM tuner, press the MODE button until the display shows the frequency in “000.0Mhz”
format. Press the PLAY/PAUSE button on either the front panel or remote control to start the automatic
station search facility, this will then auto store any stations with good reception. Use the Next or
Previous buttons to cycle thru the stored stations. The FM tuner has an automatic memory function
upon power off / power on.
MP3 Player
The onboard MP3 player can be selected by pressing the MODE button until the display shows USb
or Sd. If there is no USB stick or SD card inserted into the media player, the option to select USB or
SD will not be shown.
When playing music files from a USB drive / SD Card the MP3 / FM Tuner / Bluetooth module
offers five different playback modes. Press the return arrow key on the remote to cycle thru the
playback modes.
ONE = Single track repeat, FoD = Auto play in sequential order and repeat all, Nor = Auto play in
sequential order and stop, Rdo = Random playback, ALL = Auto play all tracks then loop.
The MP3 player features seven preset EQ modes, these can be selected using the EQ button on the
remote control to cycle thru each of the EQ modes. Nor = Normal, POP = Pop Music, rOC = Rock Music,
JAS = Jazz, CLA = Classical, Cut = Bass Cut, bAS = Bass Boost.
MP3 Recorder
Plug in a USB stick or SD card. Press and hold the PLAY/PAUSE button on either the front panel or
remote control to start recording. As recording commences, the display will count up in seconds and
minutes to show the total time recorded. To stop recording press the PLAY/PAUSE button briefly.
To playback the recording, press the MODE button to cycle thru the modes to MP3 playback.
The audio source will be as per the main output of the amplifier.
