Page
9
Instruction of Fully Pneumatic Filli
ng Machine of SGY
Series
2-4 Safety Instruction
1.
You can use soap and warm water to clean the machine. Fill hopper with cleaning agent
and water; cycle until discharge is clear of any product; fill hopper with clean water and
cycle until water is clear.
2.
Never use sharp tools on any parts surface when cleaning the internal parts and install
the parts when they are dry.
3.
Use lubricant for all moving parts.
4.
Check the o-rings of all parts and replace damaged rings.
5.
Check whether there is damage or leakage on the air lines.
6.
Fasten screws of all parts.
7.
Never clean the filler via harsh or abrasive cleaners to protect the machines integrity.
8.
Never cycle the filler without a product.
9.
Never put hard materials into the hopper.
10.
Filler should be on a flat surface in a dry place with little dust and enough room for
movement during each filling cycle.
11.
Use the machine in air-current environment when volatile liquid is to be filled.
12.
Body or materials should be far away from moving parts and our factory takes no
responsibility for any machinery and human injury due to it.
13.
Cut off the air source when repairing/replacing parts/cleaning.
14.
Never use organic flux to clean the machine, such as gasoline, benzene, xylene, banana
oil and sodium hypochlorite.
