CE-975
Operator’s Manual
Page 3
CE-975
Operator’s
Manual
VI. Main Technical Parameters
1. Input voltage: AC220V±10%, 50Hz
2. Input voltage: <10A
3. Sealing current: Static<2A Dynamic<10A
4. Operating frequency: 70~80KHz
5. Output power: ≤2000W
6. Enclosure protection class: IP2 I
7. Sealing diameter: Φ20mm~Φ130mm (Optimal diameter: Φ30mm~Φ120mm)
8. Bottles height: 40~400mm
9. Transportation diameter: ≤Φ200mm
10. Sealing speed: 2 to 12 m/min (bottle size, material, and sealing membrane)
11. Conveyor unit bearing load: ≤ 20Kg
12. External dimensions: 155×55×135cm
13. Net weight: 70Kg
V. Equipment installation and use precautions:
1. It is necessary to connect the ground wire before use (
The ground wire should not directly use three-phase outlet for
grounding, but a safe and reliable grounding wire should have connected separately, to ensure safe use of electricity
), and then
switch on the power.
2. The cross-sectional area for power cord and ground wire should be not less than 1.5mm
2
. In case of use under supply voltage
instability, mount AC automatic regulator, to ensure the quality of sealing and prevent damage to the equipment.
3. The equipment must be used in a dry, clean and ventilated environment, away from various types of heat sources.
Operating in the wet environment with severe acid corrosion will significantly shorten the use life of equipment.
For use in places with many dusts, the dusts in the sensor head and the host must be cleaned regularly.
4. The machine is only applicable for the sealing operations on plastic, glass, paper and other containers,
but NOT suitable for
those on metal and other derivative capacitors.
5. The requirements of induction machine sealing for selection of the sensing membrane and the bottle cap:
(1) The material of used sensing membrane must be the same as that of the sealed bottle.
(2) The optimum thickness range of foil on the sensing membrane is between 0.012 and 0.03mm. For
the sensing membrane with the aluminum foil being less than 0.012mm in thickness, sealing speed and
quality are not guaranteed.
(3) The vacuum aluminum plating composite membrane similar to aluminum foil induction
membrane must not used.
(4) When using the sensing membrane without paper pad, the bottle mouth and cap must be smooth
and without deformation.
(5) It is not applicable to non-threaded object sealing using the cover, as the cover can not completely
press the sensing membrane flatly and tightly, resulting in the phenomenon of loose sealing closure.