CLEOPATRA 90133701, Инструкция по установке и эксплуатации

Страница: 59 / 97

19
10.4 Colour Light Basic
The Colour Light Basic is connected to the mains power supply
as shown in the drawing below. The wiring diagram for the
Colour Light Basic is located in the cover of the control box.
Attention: The control box of the Colour Light Basic needs to be
accessible for repairs and replacement. Keep this in mind
when deciding on the location for the control box.
The 30 min. timer can be programmed with a jumper. The jumper is
located on the P.C.B. The exact location of the jumper can be found on
the wiring diagram in the cover.
JP5 open = without a timer
JP5 closed = with a 30 min. timer
The LED lights are pre-installed in the roof. The
control button needs to be installed into the
supplied wall insert. The wall insert is installed
behind the tiles, as shown in the drawing.
Make a hole in the wall for the wall insert.
Diameter: Ø35 mm
Depth: 39
mm
230V / AC 50Hz 20W
Control button
Control box
LED 2x, 4x, or 6x 3W
tiles
wall
insert