PV-ezRack SolarTripod (double and single) Installation guide V2
Page 2 of 15
11/20 Duerdin St
Tel: +61 3 9017 6688
Clayton VIC 3168, Australia
Fax: +61 3 9017 6668
www.clenergy.com.au
Email: [email protected]
1
Introduction
Clenergy PV-ezRack SolarTripod is suitable for home, commercial, flat roof and even
for large scale solar installations. SolarTripod divides 2 solutions, single row and
double rows in portrait of modules. The advantage of SolarTripod is the pre-
assembly fixed angle brackets; it reduces the time and labour in installation.
Please read the installation instructions carefully before beginning installation.
First familiarize yourself with the system components. During installation and
especially when working on the roof be sure to observe the appropriate safety
regulations and please pay attention to the relevant regulations of your local
region. Please check the current version of the installation manual under
www.clenergy.com.au.
The installer is solely responsible for:
•
Complying with all applicable local or national building codes, including
any that may supersede this manual;
• Ensuring that PV-ezRack and other products are appropriate for the
particular installation and the installation environment;
• Ensuring that the roof, its rafters, connections, and other structural
support members can support the array under building live load
conditions (this total assembly is hereafter referred to as the roof rafter
assembly);
• Use only PV-ezRack parts as specified in this document (substitution of
any PV-ezRack part may void the warranty and invalidate the letter of
certification);
• Ensuring that lag screws have adequate pullout strength and shear
capacities as installed;
• Maintaining the waterproof integrity of the roof, including selection of
appropriate flashing;
•
Ensuring safe installation of all electrical aspects of the PV array.
