16
CLEMENTS
Operation Summary
Operation Summary
See previous sections for details of individual steps.
1. Confirm that correct rotor is selected.
2. Load a balanced and evenly distributed set of sample tubes.
3. Close lid.
4. Confirm acceleration and deceleration profiles.
5. Set required speed.
6. Set required spin time.
7. Press S
TART
button.
•
The rotor will automatically accelerate to the set speed
using the set acceleration profile.
•
The rotor will spin for the set time with the time display
counting down to zero.
•
The rotor will automatically decelerate to zero using the
set deceleration profile.
•
When the rotor has stopped the beeper will signal the
end of the spin cycle.
8. Press the S
TOP
/ O
PEN
button to unlock the lid.
Note: For repeat operations using the same settings, the only
steps required are to load the samples, close the lid
and press the S
TART
button.
The previous settings are automatically restored at
power-on.
Rotor Setting
Rotor
Type
Carriers
/ Tubes
Max
rpm
Max
x g
Rotor
Setting
CEN 91700 001 Angle
24 x 10ml 4000
2850
1
CEN 91700 002 Swing
12 x 15ml 5000
4100
2
CEN 91700 003 Swing
24 x 5ml 5000
4100
4
CEN 91700 004 Swing
4 x 50ml 4200
2760
3
