Page 15
9.6 Blast helmet
The helmet should be cleaned with a disinfectant. A suitable product is Indicur from Henkel.
Attention!
This product has only been tested for its compatibility with our helmet. Please follow the man-
ufacturer’s instructions for use. We assume no liability for any skin reactions or other health problems
associated with the use of the disinfectant.
9.7 Inner lens
The inner lens should be cleaned or replaced if it becomes soiled or scratched. It can be cleaned with
warm water and a mild detergent. Solvents such as alcohol, white spirit or ammonia must not be used.
Allow the lens to air-dry. The use of cloths or similar may scratch the lens.
10 Storage
10.1 Daily storage
During breaks or at the end of work, the helmet should be hung by the handle in a clean place.
10.2 Long-term storage
After cleaning and drying the helmet, tuck the cape inside (nylon, rubber and ASS cape only). Pack the
helmet in a sealed bag or film to protect it from dirt and moisture.
