OPERATION
24
Tennant T300e/T300 (03- 2015)
6. Drive models - push the directional lever to the
forward position to go forward (Figure 68). To
reverse the machine pull the directional lever
backwards.
FIG. 68
7. To begin scrubbing, pull the start bail (Figure 69).
FIG. 69
8. Drive models - Adjust the scrubbing speed by
turning the speed dial to the desired speed
(Figure 70).
Push models - Slowly push the machine forward.
The rotating brush(es) will help assist the machine
forward.
FIG. 70
9. T300e ec-H2O model - To adjust the solution flow
rate when ec-H2O scrubbing, press the solution
flow button located on the ec-H2O module (Figure
71). One LED= low, two LED’s=medium, and three
LED’s= high.
FIG. 71
10. T300e model - To adjust the solution flow rate
when conventional scrubbing, turn the solution flow
control knob located underneath machine (Figure
72).
NOTE: The solution flow control knob is only functional
when conventional scrubbing.
FIG. 72
11. T300e model option - When extra brush pressure
is needed for heavily soiled areas lift the down
pressure lever (Figure 73).
NOTE: Release the down pressure level when raising
scrub head.
FIG. 73
12. To stop scrubbing, release the start bail and raise
the scrub head and squeegee assembly off floor.
Turn key off and set parking brake, if equipped.
Содержание TENNANT T300
Страница 47: ...SPECIFICATIONS Tennant T300e T300 03 2015 47 1095 mm 772 mm DUAL DISK MODEL 1314 mm 660 mm...
Страница 48: ...SPECIFICATIONS 48 Tennant T300e T300 03 2015 1095 mm 772 mm CYLINDRICAL BRUSH MODEL 1283 mm 635 mm...
Страница 49: ...SPECIFICATIONS Tennant T300e T300 03 2015 49 1095 mm 772 mm ORBITAL PAD MODEL 1245 mm 521 mm...
Страница 50: ...SPECIFICATIONS 50 Tennant T300e T300 03 2015...
