Clemas & Co TENNANT F8, Руководство оператора

Страница: 6 / 7

EN English
F3/F3+/F8/F12 9002026 (04
ï
11)
6
Service
S
For repairs, please contact your specialist wholesaler
or one of the service shops.
S
You will be expertly and quickly served.
Servicing instructions
The following instructions must always be observed.
S
When cleaning and servicing the machine, replacing
parts or when changing over to a different function,
switch off the drive and remove the plug.
S
The power supply lead must not be damaged by
driving over it, crushing, tugging etc.
S
Check the power supply lead regularly for signs of
damage.
S
The machine must not be used if the power supply
lead is not in perfect condition.
S
When using or replacing the power supply or
equipment supply leads, use only those specified by
the manufacturer.
S
When replacing the plug
ï
and
ï
socket connectors of
power supply or equipment supply leads, splash
protection and mechanical strength must be assured.
S
When transporting the machine in lifts, put the
shaft/bar in a vertical position so that it cannot catch
on the lift walls.
S
The shaft/bar is automatically secured against recoil
by the patented shaft/bar adjustment unit.
S
Only the spray and cleaning agents suitable for the
machine’s purpose may be used.
S
Never use highly flammable, combustible, toxic,
health
ï
hazardous, corrosive or irritant substances.
S
Repairs, including the fitting of spray agent lines and
hoses, may only be carried out by approved customer
service shops or by specialists in this field who are
familiar with all the relevant safety regulations.
Storage
S
Remove brush/pad driver from machine and neatly
coil cord around cord hook and handle.
S Store the machine in a dry place and in normal room
conditions (not below under 0
_
C)