![Clemas & Co GANSOW 105 Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/clemas-and-co/gansow-105/gansow-105_operators-manual_2622306002.webp)
Manual code: PLDC01471
Spazzatrice 105 B ENGLISH
Page 1 of 13
Use & Maintenance Manual 105/125/130 B
1. IMPORTANT WARNINGS
2. IMPORTANT INFORMATION BEFORE USE
3. OPERATING THE MACHINE
4. TIPS
5. TROUBLESHOOTING
6. SERVICE, MAINTENANCE AND PERIODIC CONTROLS
7. INTERPRETING ERROR MESSAGES
8. TECHNICAL SPECIFICATION
1) IMPORTANT WARNINGS
a. IMPORTANT: Do not wash this machine with high pressure machines.
b. IMPORTANT: in this manual, "right", "left", "front" and "back" refer to the point of view of the
seated operator in the working position.
c. This machine is designed to sweep dry non-carpeted floors.
d. This machine is not approved for use on public roads or highways.
e. This appliance may only be used by personnel fully trained in its correct and appropriate use. In
order to prevent unauthorised use of the machine always remove the key from the key switch
before leaving the appliance unattended.
f. Always park the machine with the parking brake on.
g. When using the machine, the operator should take the utmost care to avoid damage to third
parties for which he would be held entirely responsible.
h. Do not use the machine on slopes of more than 18%.
i. Before any cleaning or servicing work is carried out on the machine, the following precautions
must be taken:
j. Disconnect the negative terminal from the drive batteries under the main cowling, remove the key
from the key switch on the control panel and activate the parking brake. This will prevent the
machine from moving accidentally.
IMPORTANT: When replacing the fuses, always disconnect the negative terminal from the
battery to avoid short circuit.
k. We expressly draw your attention to the fact that parts and accessories which are NOT original
and are not supplied directly by Gansow have not been tested or certified by Gansow.
The installation and/or use of such parts may therefore adversely affect the efficiency and
characteristics of your machine, jeopardising its active and passive safety. The Manufacturer