Clemas & Co DEMON TYPHOON 2, Руководство оператора

Страница: 5 / 38

Demon Typhoon Manual Issue 1/07
Page 4
FAULT FINDER
FAULT CAUSE REMEDY
Boiler will not work Blown Fuse Check power to electrical enclo ‐
sure and 3.15 amp control fuses.
Sudden pressure loss No water
No Chemical
Burst disc blown
Check water supply
Check chemical drum, close valve.
Replace Disc
Water turns to steam during
normal use
Partially blocked H.P.Nozzle. Clean and flush machine
Low pressure HP Nozzle worn
Unloader set wrongly
Replace
Reset unloader valve
Low pressure with
Noise & vibration
Valves worn or blocked
Piston seals worn
Pump sucking air
Clean or replace as required
Replace
Check chemical valve and inlet
pipe
Pump will not By ‐ pass Jammed non ‐ return valve
O Ring damaged
Clear blockage
Replace
Water drips from pump bot ‐
tom
Piston seals worn Replace
Oil drips from pump bottom Oil seals worn Replace
Burner will not ignite Fuel tank empty
Fuel filter blocked
Fuel nozzle blocked
Electrodes dirty
Out of adjustment
Flow switch out of adjust ‐
ment
Refill
Replace
Clean or replace
Clean or replace
Reset
Adjust
Oil is milky in colour Water ingress through oil
filler plug
Drain oil, rinse out with clean par ‐
affin the replace oil
Flames coming out of chimney Poor quality fuel leading to
poor combustion and then
burning off of excess fuel in
the boiler.
Maintain the fuel system more
often, drain the sediment out of
the tank regularly and clean or
replace filters and nozzles more
often.
If in doubt ask—our advice is free and can save you money