6
Step 10
Verify that the Rear-Facing Level Reference
Line appropriate for the child’s weight is
parallel to the ground as shown in
Figure 8
.
If not, go back to Step 5, adjust the recline
level and try installing again, or move the
seat to a different vehicle seating position.
NOTE:
If needed, a rolled towel or pool
noodle may be placed under the foot end of
the car seat to achieve an acceptable recline
level.
Step 11
Install Seat Cushion, see “Removing/Installing
Seat Cushion” in your car seat manual.
Child seat is
properly re
clined in Re
ar-Facing mod
e when the
line
appropriate
for the chil
d’s weight
is parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
3
• To R
elease
Rigid
LATC
H Con
necto
rs:
Fully
extend
Conne
ctors,
then p
ull Red
Rigid
LATCH
Release
Handl
es.
2
Forwa
rd-Fa
cing
Rear-
Facin
g
Child seat is
properly reclined in Rear-Facing mode w
hen the line
appropriate
for the chil
d’s weight i
s parallel to
the ground
USE THIS LINE FOR INFANTS UNDER 22 lbs (10 kg)
USE THIS L
INE FOR CH
ILDREN BET
WEEN 22 -
50 lbs (10
- 22.7 kg)
Rear-
Facin
g
1
• To Release Rigid LA
TCH Connectors:
Fully extend Connectors, then pull Red Rigid LA
TCH Release Handles.
Forwa
rd-Fa
cing
Figure 8
