Apex Tool Group
P2332BA | 2019-08
17
7
EN
7.4.3 LMC submenu (LiveWire Memory Chip)
7.4.4 Submenu WLAN wireless transmission
The
WLAN wireless transmission
submenu shows the set-
tings being used.
If no actions are carried out, the menu is automatically
exited after 60 seconds.
The radio settings are parameterized via the
LiveWire RF
Settings
software.
Initiator test
The functional readiness of the initiators
can be checked with the initiator test.
•
If an initiator is assigned, the related
status LED lights up green.
•
If an initiator is not assigned, the
related status LED lights up red.
To activate the function, press the
On/Off button.
Extension board test
Number of extension boards:
P: Number of programmed extension
boards
F: Number of extension boards found
This can be used to check the essential
function of the boards.
MAC address
MAC address display.
Serial number
Serial number display.
Country code
Various WLAN frequency ranges are
available:
•
World: worldwide approved
•
US/CA: approved in the USA
•
EU: approved in Europe
•
JP: approved in Japan
•
CN: approved in China
Init.
test
Ext. boar
P 02.
F 00
MAC
00302e
e162f8
S: 5800
00008D
54C823
Country
code
World
Wireless module version
Displays the installed software version
of the wireless module.
MAC address
MAC address display
IP address
IP address display
Subnet
Subnet display
Gateway
Gateway display
Host
Display of socket tray designation in a
network.
SSID
SSID display. Only a maximum of the
first 12 characters are displayed.
BSSID
Access point with which the WLAN
socket tray is connected.
Signal strength
Change to graphic view of current qual-
ity of wireless signal via function key
<F1>.
To activate the function, press the
On/Off button.
Version
#27173
Dec 1
MAC
00302e
e162f8
IP 010
122.0
77.110
Sub255
.255.2
40.0
Gat010
122.0
61.001
Host
122.0
61.001
SSID
APEX
BSSID
WLAN
Signal