EASY
TO HANDLE
. HARD
TO BREAK.
7. Using the directional keys, set the tar-
get torque value in Nm (default). Cleco
recommends setting the torque value to
5Nm on the pistol and 10 Nm on the right
angle unless the test joint is fixtured in a
vice. Please reference the catalog for the
minimum torques.
8. Select the batch count.
NOTE:
The test joint has a 13mm and
10mm bolt, so batch count of one (1) is
the default value.
9. Select the free speed you would like to
run on the tool.
NOTE:
Do not set the free speed below
50 RPM.
Demo Sheet - Tool Programming 3
Содержание CellCore mPro200GC
Страница 1: ...CellCore Demo Pocket Guide...
Страница 16: ...EASY TO HANDLE HARD TO BREAK CellCore Programming Tree...
Страница 17: ...EASY TO HANDLE HARD TO BREAK Product Snapshot Quick Reference...
