2123b_1_5_en_ bedingt.fm, 03.07.2014
P2122BA/EN 2014-06
11
Before initial operation
4
4.3.1
Testing
4.4
Setting up the tool
The tool must be configured for the desired rundown.
4.4.1
Setting the torque
Abb. 4-1
Fully open exhaust air throttle anti-
clockwise.
Check speed at output drive:
Clockwise rotation 4,000 ±500 rpm
Anticlockwise rotation 6,500
±500 rpm.
CAUTION!
Danger of injury from unintended startup.
Shut off the compressed air before adjusting the torque.
CAUTION!
Danger of injury from rotating hex wrench.
Adjust the torque using the provided hex wrench only. Never use an angular wrench.
Settings example:
Tightening: 25 Nm
Screw M8: 8.8
Approximately 3 turns of the
torque adjustment screw
Nm
T
orque
Settings example: 25 Nm
Turns of torque adjustment screw
Содержание 35PTHH
Страница 14: ...14 P2122BA EN 2014 06 2123b_1_5_en_ bedingt fm 03 07 2014 Troubleshooting 5 Empty side ...
Страница 20: ...20 P2122BA EN 2014 06 2123c_Wartung_en_bedingt fm 03 07 2014 Maintenance 6 Empty side ...
Страница 38: ...38 P2122BA EN 2014 06 2122e_Ersatzteile_en fm 03 07 2014 Spare parts 9 9 5 Equipment order list 1 Order no ...