Page 8
Step 3: Clearwater Speaker Installation
Custom Sound Module:
• Inside the door cavity there is a side impact protection bar. Using the
provided large zip tie secure the “Custom Sound Module” to the bar using
the following directions:
a) Feed the zip tie through one of the holes on the sound module.
b) Insert the sound module into the door cavity through the speaker opening.
c) With the wires pointing toward the front of the car, wrap the zip tie
around the protection bar and back through the second hole of the
sound module. (this will not compromise any protection). After the
module is secured against the bar, cut off the excess tie.
A
D
B
E
C
d) Remove the tape from the factory connector and plug it into the
“input” plug on the sound module.
e) With one of the small zip ties, attach the wires labeled “input” and
“tweeter” to the factory wires located above the woofer cutout between
the plastic and metal parts of the door. Cut off the end of the zip tie.
