KR356H DVB-S2 HD IRD User Manual
29 / 43
Figure-2
Parameters
→
Input 1/2 (Tuner 1/Tuner 2 Input):
From the menu on left side of the webpage, clicking “Input 1” or “Input 2”, it displays the
interface where users can configure the 2 RF input parameters separately. (Figure-3)
Figure-3
Parameters
→
Input 3 (ASI Input):
“Input 3” refers to the ASI source which does not need to configure. Users can only read
the signal lock status and input bitrate. (Figure-4)
System
informatio
n
Language
shift area
Configure
RF
parameters
in
this
area
according
to
signal
source
to
receive programs.
Click
“Apply” button to
apply the input data to
start receive signals.
Output information of the
TS and decoded program.
RF input
Input information
of the two satellite
signals, ASI and
IP stream.
ASI input
IP input
User can click any item here to enter
the corresponding interface to check
information or set the parameters.
