KR356H DVB-S2 HD IRD User Manual
16 / 43
3.2 General Setting
Switch on the device and after a few seconds’ initialization, it presents start-up pictures as
below:
⚫
HD IRD
: Device’s name
⚫
Bitrate: xx.xxx MHz
indicates the current effective bitrate multiplexed output.
Press LOCK key on the front panel to enter the main menu. The LCD will display the
following pages where user can configure the parameters for the device:
User could do all the settings according to the 8 directions displayed on the LCD. User can
press UP/DOWN buttons to specify menu item, and then press ENTER to enter the
submenus as below:
3.2.1 Status
Alarm:
The alarm indicator will turn on if there is no A/V signals inputting or outputting bit
rate overflows. User then can enter this menu to check the error type. Otherwise it shows the
‘system is normal’.
Uptime:
It displays the working time duration of the device. It times upon power on.
Start up
…
Start OK
…
HD IRD
Bitrate: xx.xxx Mbps
Main menu
1 Status
2 Input Sets
3 CI Card
4 BISS Descramble
5 TS Config
6 Decoder
7 IP Stream
8 Network
9 System
Alarm
System is normal
