HD168Bi Manual Rev 1.0
3.2.3 Step 2: Adjust System Settings
Click on
SETUP
then on
System
You can reset the unit to Factory Default or just Hardware Reset by clicking on this dropdown
here.
Be sure to always press the
Save Settings
to the left after selecting your option. The IP Address of
the unit can be adjusted in the 192.168 range. The last 2 sections are adjustable
here
. MAC address
and Password can be changed and after each change press the
Save Settings
button to the left.
The output resolution of each channel can be set
here
.
After all settings have been adjusted press the-
Store Settings and Reboot System
for them to be saved completely.
If the buttons turn grey while you are adjusting settings log out then back in again
To activate them.
The
STATUS
but only shows you status of the device and changes cannot be made in this menu.
