Pedal Configuration (if applicable):
Each pedal is programmed to perform multiple actions, depending on the step in the workflow.
1. Left Pedal
a. Take Picture
b. Keep and Take Another Picture
c. Yes (attribute dose to X person)
2. Center Pedal
a. Keep Picture
b. Submit for Mid-Prep Review
c. No (attribute dose to X person)
3. Right Pedal
a. Discard Picture
b. Submit for Final Review
Though the pedals are pre-programmed, you may customize the pedal actions. To do so:
1. Press and hold the left pedal.
2. Plug the USB cord into a USB port on the computer.
3. When the light on the pedal starts blinking, release the left pedal.
4. Once the computer recognizes the pedal, open the drive and run the Windows programming
application.
5. Set each pedal to the desired action or combination of actions.
6. Save the configuration.
7. To use the pedal, unplug the USB connection and plug it back in without pressing any pedals.
.
