background image

 
 
 

b. If the CleanCam is not selected by Hyperspace by default, you may have other TWAIN 

drivers installed. In order for Hyperspace to select this device by default, uninstall other 
TWAIN drivers or consult with your Epic representative for other options. 

 

Hardware Set-Up 

1. CleanCam-1016 (Hood Mount): 

1. If using ClearView’s mount: 

i.

Attach the mounting arm to the magnet base using the provided hardware. 

ii. Install the Hood Mount by attaching the magnet base to a magnetic surface on 

the hood body.  

1. It is recommended to attach a ClearView-branded vinyl sticker to the 

underside of the magnet mount before attaching the magnet to a hood. 
This will help prevent metal-metal contact between the hood and 
magnet base. 

Use caution when installing or repositioning the magnet 

base

. Any force not parallel to the surface of the hood may cause the 

edge of the base to damage the hood. ClearView is not responsible for 
any damage to property arising from improper installation or 
repositioning of the mount.  

a. Removal of the mount:

 The magnet mount is a semi-permanent 

attachment. Depending on the magnetic properties of your 
hood, it may take substantial force to remove the mount from 
your hood. To avoid damage to the hood and mount, remove 
the mount by applying force directly to the magnet base (not 
the mounting arm) in a direction parallel to the hood surface 
until the magnet reaches an edge of the hood and gently slide 
the magnet off the hood.  

iii. Loosen the universal ball joint adapter (point a.) and screw point c. into the 

¼”-20 attachment point on the top of the CleanCam.  

1. Point b. should not be removed from the assembly as it provides an 

easy method to tighten the screw attachment into the CleanCam and its 
scored surface will prevent the connection from becoming loose. 

 

Содержание CleanCam 1006






Отзывы: