7
CLEARSPAN
™
DOME TENTS
Visit
www.ClearSpan.com
for additional products and customer assistance.
7. Verify that the mounting bolts are tight and install the
tent legs (#131P090D). Use additional help if needed.
FRAME ASSEMBLY (CONTINUED)
8. Secure the legs using the 1/4" x 2" bolts and nuts.
9. After securing each pipe splice and verifying that all
mounting bolts are tight, move the frame to the desired
location if needed.
10. Adjust the leg width to 10' on-center. Measure from
the center of one leg to center of other leg. Adjust if
needed.
NOTE:
To help prevent the leg pipes from sinking into
the ground, place wood blocks or other similar supports
under each leg.
11. Continue by anchoring the tent frame.
10'
10'
OPTIONAL INSTALLATION - SIDE PANELS
If the shelter includes the optional side panels (additional
purchase required), these panels are attached to the frame
before
the main cover is installed. If the shelter does not
include the optional panels, continue with the main cover
installation steps.
NOTE:
Like the main cover, the optional side panels are
attached to the frame using the snugger balls (CC4595)
in the manner illustrated.
Do not install panels without first
anchoring the assembled frame.
Continue with these steps to attach the side panels:
1. Unpack panels and unfold completely.
2. After anchoring the frame, lift the panel into position,
place the snugger balls through the grommet holes,
and loop around the lower end rafter legs.
NOTE:
Secure the top edge of the panel if it is
equipped with grommets. Some panels may not include
grommets along the upper or lower edges.
3. Install all side panels and continue with the main cover.
Optional
Side Panel
ANCHOR THE SHELTER
At this point, anchor the shelter. Consult the MUST READ
document for anchoring information and suggestions.
Please call customer service at 1-800-245-9881 for
additional anchoring information.
CAUTION
: The anchor assembly is an integral part
of the shelter construction. Improper anchoring may
cause shelter instability and failure of the structure
to perform as designed. Failing to anchor the shelter
properly will void the manufacturer’s warranty and may
cause serious injury and damage.
