ClearPix CPX-ENC40-H2, Руководство по установке

Страница: 20 / 23

12
Setting the IP Address
Through the ARP/Ping Method
Complete the following steps to configure the encoder to use a
specific IP address:
1. Locate and copy down the MAC Address (MAC) listed on
the Serial Number Tag for reference.
2. Open Command Prompt.
From the Windows Start menu, select
Run... then enter
cmd
in the Run dialog box and click OK .
3. In Command Prompt, enter the following commands:
a.
arp -s
<New Encoder IP Address>
<Encoder MAC Address>
For example:
arp -s 192.168.1.10 00-18-
85-12-45-78
b.
ping -l 123 -t
<New Encoder IP
Address>
For example:
ping -l 123 -t 192.168.1.10
4. Reboot the encoder.
5. Close Command Prompt when you see the following
message:
Reply IP from
<New Encoder IP Address>
: ...