ClearPix CPX-ENC40-H2, Руководство по установке

Страница: 18 / 23

10
LED Indicators
Once the encoder is connected to the network, the connection status
LEDs will display the encoder’s progress in connecting to the Network
Video Management software.
The following table describes what the LEDs indicate:
Table:LED Indicators
Connection
State
Connection
Status LED
Description
No Link Off Not physically connected to any
network device.
Obtaining IP
Address One short
flash every
second Attempting to obtain an IP address.
Connecting
to NVR Two short
flashes every
second An IP address has been obtained and
is attempting to connect to the server
Upgrading
Firmware Two short
flashes and
one long flash
every second Updating the firmware.
Connected On Connected to the Network Video
Management software.