2
t
EChnICal
s
uPPort
: 800.283.5936
Connections
The VIEW Pro D110 decoder has connectors as described below.
•
1x - IR Input connector compatible with StreamNet IR sensor (3.5mm)
•
1x - IR Input Receiver window on front panel
•
1x - IR Output connector compatible with StreamNet IR emitter (3.5mm)
•
1x - Balanced Audio Output (Modular Phoenix-type connector, left and right)
•
1x - Stereo 3.5mm Barrel Plug (Line Level) Input (Currently not used)
•
1x - Stereo 3.5mm Barrel Plug (Line Level) Output
•
1x - HDMI output connector.
•
2x - 10/100/1000 Ethernet jacks (Use only jack 1)
•
3x - General Purpose Input (General Purpose Inputs - Digital, 0/5V, Phoenix-type)
•
3x - General Purpose Output (Contact Closure Output, Latching, Relays, Phoenix-type)
•
2x - RS-232 DB-9 connector
•
3x - USB connectors (one USB connector on front panel not visible)
OUTPUTS AND CONNECTIONS
10/100/1000 E
thErnEt
J
aCks
The 10/100/1000 Mb Ethernet connector allows connection to TCP/IP networks setup to run
StreamNet. Only Port 1 (Red Jack) is supported. The other is a service port that MUST NOT be
connected.
s
tatus
lED
An LED on the front panel lights up when the unit is powered and to report status:
Off=Off
Yellow=Update process has started (e.g.: Update Devices)
Blue=Normal Operation
Green=System Startup/shutdown
Red=Error Condition
hDMI o
utPut
The HDMI connector on the D110 send digital video and audio.
