UNITE 160 4K Camera
13
DOC-0501-001v1.0
User Manual
Back to Table of Contents
November 2022
4.8 Communication Setup
When in the main menu page, move the cursor to
[Communication Setup] and press the [HOME]
key to confirm and enter the Communication
Setup page as shown here.
Protocol:
Auto, VISCA, PELCO-D, PELCO-P.
V_Address:
1 ~ 7 (Effective in Auto, VISCA
protocol).
V_AddrFix:
On, Off (When set to On, the 88
30 01 FF command does not work. Effective in
Auto, VISCA protocol).
P_D_Address:
0 ~ 254 (Effective in Auto, PEL-
CO-D protocol).
P_P_Address:
0 ~ 31 (Effective in Auto, PEL-
CO-P protocol).
Net Mode:
Serial, Paral (Effective in Auto, VISCA
protocol).
Baudrate:
2400, 4800, 9600, 38400.
4.9 Restore Default
When in the main menu page, move the cursor
to [Restore Default] and press the [HOME] key
to confirm and enter the Restore Default page as
shown here.
Restore:
Yes, No.
Note:
GUI menu and parameters are subject to change without notice.
Notice
When “Yes” is selected and confirmed with the [HOME] key, all parameters will be restored to
their default values, including the IR Remote address and VISCA address.