7
Fig. 10
Plenum Rated Antennas
Mounted below the
Ceiling Tiles.
Fig. 12
Antenna
Position
AV Rack
Mounted
Fig. 11
Receiver Mounted on
Outside of Ceiling Tile
with PoE to CONVERGE
Pro 2 or Beamforming
Mic Array 2
1
Mounting Antennas to Wall, Ceiling or AV Rack:
Fig. 8 Antenna
Bracket Assembly
Wall Mounted
Mount antenna over-head and within line of site to transmitters.
The dipole antenna’s reception is strongest at the sides of the
antenna with a null point at the tip. Therefore, it is best to tilt the
antenna so that the side faces the transmitters.
• Wall Mount
(Fig. 8).
• Ceiling Mount
(Fig. 9, 10, 11).
• Ceiling Mount RX with PoE to CONVERGE Pro 2
or Beamforming Mic Array 2
(Fig. 11).
• AV Rack Mount
(Fig. 12).
Separation distance of antennas should be a minimum of
2’ (ft.) and maximum of 30’ (ft.).
2
Repeat steps 1 to 4 for the second antenna and extension cable.
3
4
Attach the other end of the extension cable to the Dialog 20 Receiver and secure
by using a non-conductive adhesive on the threads of the Female TNC Connector.
Attach TNC panel mount connector (C) and permanently secure
both the antenna and the extension cable (E) to the antenna
extension bracket (A) by using a non-conductive adhesive on the
threads of both sides of the TNC Panel Mount Connector
(Fig. 8) .
5
Professional installation is required. Installer is responsible for securing antennas with a non-
conductive adhesive and ensuring mounting hardware is appropriate to their particular installation.
Power Over Ethernet
To CONVERGE Pro 2 or
Beamforming Mic Array 2
Fig. 9
Plenum Rated Antennas
Mounted in the Crawl
Space above the
Ceiling Tiles using 3rd
party “T-Bracket”.
Suggested Mounting Options:
To Receiver
To Receiver
Apply
Non-Conductive
Adhesive
ClearOne
®
DIALOG
®
20 and DIALOG
®
10 USB
_____________________________