5
4
5
Drill two 5/16” (8mm) pilot holes
(Fig 2).
Fold the anchor (D) in the middle by pressing
in middle with finger
(Fig. 3).
Insert anchor in hole and tap flush with a ham-
mer
(Fig. 4).
1
2
3
Using the antenna extension brackets or the
templates
(fig. 1; Pg. 2),
mark the two (2) mounting
hole locations.
Hollow Wall Antenna Installation:
Determine required mounting location.
6
Use nail or small screwdriver to pop anchor open
behind hollow wall
(Fig. 5; not necessary for thick or
solid walls).
Do not hammer nail or screwdriver.
7
Remove the nail or screwdriver.
8
Repeat steps 4 - 7 for the second anchor.
To avoid interference, only one anchor should
be installed vertically.
9
Secure antenna extension bracket (A) using
two (2) wood screws (B)
(Fig 6)
.
Do not overtighten screws.
Hollow wall anchors (D) may be used as wedge anchors in walls thicker than 3/4”
or as expansion anchors in solid walls.
Fig. 3
Wall
Anchor
Fig. 4
Wall
Anchor
Flush
Fig. 5
Wall Anchor
open in wall
Fig. 6
Secure
Bracket to
Wall
Fig. 2
Wall
Anchor
ClearOne
®
DIALOG
®
20 and DIALOG
®
10 USB
_____________________________