MOUNTING
Installation
Your CONVERGE Pro 2 product comes pre-installed with rack mount ears that fit a standard 19” rack, and a
screw/washer kit� Rack mounting eliminates the need for space between multiple units�
Mount the unit by securing the rack-mount ears to two posts or mounting strips in the rack using the four screws
and washers provided� Because the rack-mount ears support the weight of the entire chassis, be sure to use all
four screws and washers to fasten the two rack-mount brackets to the rack posts�
CONTROLS AND CONNECTIONS
Refer to the following diagrams and descriptions for CONVERGE Pro 2 front panel controls and back panel
connectors�
CONVERGE Pro 2 Front Panels
CONVERGE Pro 2 Front Panel Control Descriptions
A.
USB Type B Port
: Provides convenient front panel connectivity for laptops, MAC, and PCs�
B.
LED
»
Power: Solid blue indicates the unit is powered on�
»
Status:
•
Off (no light): Unit still initializing
•
Fast blinking blue: Stack Syncing in progress
•
Slow blinking blue: Unit not configured
•
Solid blue: Configured unit
•
Fast blinking red: Stack Sync error
»
Locate: Blinking blue indicates that the “Locate” command has been received�
C.
Locate Button (C)
: “Locate” Capacitive Touch Button identifies hardware devices from software devices,
or software applications from hardware devices� Shows model number, unit name, IP address�
3
A
B C
4
