AccuMic Microphone
— AccuMic PC
6
Configuring volume control settings
To ensure audio is heard clearly on both ends, you must configure the Volume Control
settings on your computer. You need to mute the near-end microphone balance to prevent
local audio feedback. (Note: This does not mute the AccuMic Microphone). You also need
to select and adjust the far-end microphone balance to ensure audio is being sent at a
proper level and far-end participants can hear you.
To open the volume control panel
1. From the Start Menu, go to
Settings
, then
Control Panel
.
2. Double click the
Sounds and Multimedia
icon to open
Sounds and Multimedia Properties
.
3. Select the
Audio
tab and click
Volume
in the Sound Playback section.
The Volume Control panel will open.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 8. Sounds and multimedia properties
Figure 9. Volume control
