Wall Mount InstallatIon GuIde
3
Wall MoUnT inSTallaTion GUide
ConneCTionS
This section explains the connections made in Touch Panel Controller
installations.
P
owering
a
T
ouch
P
anel
c
onTroller
The Touch Panel Controller can be powered by:
•
included power adapter
•
standard PoE injector or PoE Ethernet switch
•
P-Link from CP2 or other P-link device (carries only power)
c
ommunicaTion
c
onnecTions
•
RS232 – A Touch Panel Controller can connect to a CP2 or GPIO/
USB expanders via serial RS232 cables, up to 150ft.
•
Ethernet – A Touch Panel Controller can connect to a CP2 in
an Ethernet network via a standard Ethernet switch, up to 300ft
between the controller and switch.
•
Wi-Fi – A Touch Panel Controller unit can be fitted with the included
Wi-Fi antenna and configured to connect to a Wi-Fi network.