User manual / Bedienungsanleitung
Page / Seite 6
© clearaudio electronic GmbH, 2021-04
Pic. 7a: Direction of the tonearm
Abb. 7b: Mounting direction of the upper part
(to the right)
Pic. 8a: Direction of the tonearm
If the tonearm is to swing out clockwise (to the rear), then the upper part of the
swing base
must
be screwed in the position as shown in picture 8b.
Pic. 8b: Mounting direction of the upper part
(to the rear)
Now you can tighten the screws of the upper part of the
swing base
with the hex wrench #2.
Finally, re-check all settings again. The TT5 with
swing base
is now ready to use.
If the tonearm is to swing out counterclockwise (to the right), then the upper part of the
swing base
must be tightened in the position as shown in picture 7b.
