User manual / Bedienungsanleitung
Made in Germany
7
To manually stop the charging process, go to “STOP Charging?” screen and confirm with a long
press. The display confirms the stopped charging process with following display.
Please note:
The unit will take up to 30 seconds to completely start or stop the charging process.
5. Operating information
• If the front button is not pressed for 30 seconds the display returns to “Status information”
(see page 5).
• As long as a load is connected to the
smart power 24V
and the remaining charge level is sufficient
for operation of the connected device there will be no charging.
• A reduction of the output voltage of up to 4V between two charging cycles is normal.
Crucial for the correct speed of the turntable is a noise free current and not the absolute value.
This is ensured by battery-buffering and a special, linear regulation in the turntable.
•
Switching off
the unit is done using the power switch on the rear side of the
smart power 24V
.
Please note:
To prevent overheating of electronic parts never cover or put anything on top of the
smart power 24V
.
Do not dispose the unit in the domestic waste.
Do not expose the
smart power 24V
to a temperature above 40° Celsius.
Clearaudio electronic GmbH
Spardorferstraße 150
91054 Erlangen
Germany
Phone: +49 9131 40300100
Fax: +49 9131 40300119
www.clearaudio.de
www.analogshop.de
Charging Stopped
