Clearaudio Ovation, Руководство пользователя

Страница: 11 / 20

User manual
Made in Germany 11
Now you can connect the
Ovation
turntable with the main supply.
Pic. 12: Connection to the main supply
2.9 Speed fine adjustment
As the motor adjustment is already pre-set at the factory, you don’t have to check the speed before
using the turntable for the first time.
Over the time there may be soiling of the sensor or the sensor ring, which can cause some small
speed deviations.
If you want to check the speed of your turntable by yourself over time, we recommend to use a
Stroboscope Testrecord
.
To adjust the speed so perfectly and precisely as possible, we recommend the Clearaudio
Stroboscope Testrecord
(Art. No. AC038) and the Clearaudio
Speed Light
(Art. No. AC039, both
available at www.anlogshop.de ).
On the backside (close to the power supply input) of your turntable there are three setting trimmers:
Pic. 13: Speed fine adjustment
- Right trimmer = setting 33 1/3 rpm
(near power supply jack)
- Middle trimmer = setting 45 rpm
- Left trimmer = setting 78 rpm
If you would like to adjust the 33 1/3 speed, take the aluminum screw driver (see accessories)
and turn the right trimmer until you have reached the right speed according to the Stroboscope
Testrecord (please follow the user manual of the respective manufacturer).
- Turning the trimmer counter clockwise = reduces the turntable speed
- Turning the trimmer clockwise = increases the turntable speed
Please proceed with the speed adjustment for 45 rpm and 78 rpm in the same way!