background image

 Double Matrix 

Professional

 

 
 
 

 

 

 User 

manual 

 

Page 15 

                                                        

 clearaudio electronic GmbH 2012 

 

7. Warranty information 

 

The warranty period for the 

Double Matrix Professional is two years. 

 
You can achieve the extended 
clearaudio warranty time of three years, if you fill out the 
warranty card and send it to the following address within two weeks after purchase: 

 

clearaudio electronic GmbH 

Spardorfer Str. 150 

91054 Erlangen 

Germany

 

 
Please note: if fluids which produce foam or which are acid-based have been used, or if the 
precautions which have been mentioned in this instruction manual have not been followed, the 
warranty will be void. 
 
The 

Double Matrix Professional should only be repaired by clearaudio approved institutions or 

persons, or by clearaudio, otherwise the warranty will be void. 

 
For your own safety a frequent visual check of the mains cable is suggested. If any damage should 
occur, repair or exchange should be done immediately using an approved electrician or institution! 
Any service of clearaudio products should only be done through certified clearaudio dealers. 
 
If damage for any reason should occur where repair to the machine is necessary, it should be sent to 
the selected dealer, distributor or directly to: 

 
 

clearaudio electronic GmbH 

Spardorfer Str 150 

91054 Erlangen 

Germany

 

 

Tel/Phone:  +49-(0)9131/ 40300100 

www.clearaudio.de

 

www.analogshop.de

 

[email protected]

 

If a warranty repair is accepted by clearaudio the repair will be free of charge during the warranty 
period.   
 
If you transport or ship the clearaudio 

Double Matrix Professional machine for any reason, the 

original packaging must be used. Please pack the machine as it was packed originally by clearaudio 
to ensure secure transport. 

 
Legal disclaimer:  
 

clearaudio refuse to cover any claims or damage to records or any other damage that have been 
caused by misuse or mishandling of the 

Double Matrix Professional machine!  

 

 

Содержание Double Matrix Professional


















Отзывы: