Page 4 of 21
Ethernet Cable
The Ethernet cable connects the Internet port on your Clear Modem to
your PC or laptop computer.
Clear Modem
Quick Start Guide
Provides quick installation instructions for getting your Desktop CPE up
and running.
Welcome Letter
A brief introduction of the stuff inside the packaging and customer
service contact window.
Regulatory letter The FCC regulatory statement for this Clear Modem
In addition, you will also need:
A computer
An RJ-11 telephone cable (optional, if you would like to use VoIP function).
Easy Setup
The CPE is easily set up in your home. Basic installation equipments needed are the power
adapter, Ethernet cable and a PC or laptop computer and the CPE device. If you want to use
the VoIP functionality, you will also need an RJ-11 phone cable and a telephone [external ATA
is needed].
Perform the following tasks before powering up the unit:
Stand the Clear Modem on a flat surface.
Plug the power adapter into the power connector on the back of the unit.
Plug the AC power cord into an AC outlet. The unit will turn on.
Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.
Plug the other end of the Ethernet cable into the Ethernet connector of your computer.
To use VoIP functionality of the phone, plug one end of the phone line into the activated
phone connector on the back of the unit. Phone line activation is dependent upon your
service contract.
Plug the other end of the phone line into the phone line connector of your telephone.
