Clear Systems GmbH
•
Schweinthal 25
•
91349 Egloffstein
•
Phone: +49 9197 23 53 23 5
• Seite
4/8
Updated: 01/07/2022
Product description
Andino Gateway forms a connection between a local network and a 4G or LoraWan
network. Data can be collected via a local Ethernet network, RS485 or USB.
Andino Gateway offers the following services:
•
Mounting on a top-hat rail in an electrical distribution / 9 partial units (TE)
•
Accepts a Raspberry Pi 3, Pi 4 or a CM4 via adapter.
•
Can be operated with 24V DC or 85V - 230V AC.
•
Provides an isolated RS485 interface.
•
Internal Mini PCIe slot with adaptation to USB.
•
SIM card slot accessible from the outside
•
OLED display in the lid for status indication
•
Internal RTC and internal I2C slot
•
Internal temperature monitoring (DS1820)
Intended use
The Andino gateway is designed for mounting in electrical distribution boards.
The device can be operated with 24V or 85V AC - 230V AC.
For operation with 24-volt DC voltage, the power supply must provide min. 15
watts.
When operating with 85V - 230V AC, the connection to the mains supply must be made by a
qualified electrician. In this case, the power supply should be fused with 6A.
The device may only be operated vertically (wall mounting).
Any other use than specified is not permitted! Changes can be made to the
damage to this product, moreover, this is associated with hazards, such as short circuit,
fire, electric shock, etc..
The operator, not the manufacturer, is responsible for all personal injury and property da-
mage resulting from improper use.
Please note that operating and/or connection errors are beyond our control.
Understandably, we cannot accept any liability for any damage arising from this
