Clear Systems Andino Скачать руководство пользователя страница 3

 

Clear Systems GmbH 

 Schweinthal 25 

 91349 Egloffstein 

 Phone:  +49 9197 23 53 23 5  

  

andino.systems

 

  Seite 

3/8

 

Updated: 01/07/2022

 

Safty instructions                                                                                           

 

 

The applicable VDE regulations must be observed for all devices that require an electrical  voltage for 
their operation. The VDE directives VDE 0100, VDE 0550/0551, VDE 0700, VDE 0711 and VDE 0860 are 
particularly relevant for this product. Please also observe the following safety instructions:

 

 

• 

Do not continue to use the Andino Gateway if it is damaged. 

 

• 

Assemblies and components do not belong in children´s hands!

 

• 

Devices that are operated with a supply voltage greater than 24 V may only be connected by a qualified 
person. The 230 V version of the Andino gateway may only be connected to the mains voltage by a 
qualified electrician.

 

• 

Use only approved and suitable antennas.

 

• 

Never operate the device without an antenna. It will be damaged.

 

• 

The electromagnetic radiation emitted by this device complies with the legal requirements. However, 
avoid prolonged direct contact with the antenna while the device is in operation.

 

• 

When handling products that come into contact with electrical voltage, the applicable VDE regulations 
must be observed.

 

• 

In commercial facilities, the accident prevention regulations of the German Federation of Institutions for 
Statutory Accident Insurance and Prevention (Verband der gewerblichen Berufsgenossenschaften) for 
electrical systems and equipment must be observed.

 

• 

Components, assemblies or devices may only be put into operation if they have previously been installed 
in a housing in such a way that they are safe to touch. They must be disconnected from the power 
supply during installation.

 

• 

Do not drop the product or subject it to strong mechanical pressure, as the effects may damage it.

 

• 

The device must be protected from moisture, splash water and heat exposure.

 

• 

Ensure sufficient air circulation during operation and avoid ambient temperatures of more than 50°C.

 

• 

Do not operate the device in an environment where flammable gases, vapors or dust are present.

 

• 

In schools, training facilities, hobby and do-it-yourself workshops, the operation of assemblies must be 
responsibly supervised by trained personnel.

 

• 

If the unit needs to be repaired, only original spare parts may be used! The use of deviating spare parts 
can lead to serious damage to property and personal injury! Repair of the device may only be carried out 
by a qualified electrician!!

 

• 

This appliance is not intended to be used by persons (including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and/or knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a person responsible for their safety.

 

                                                                                         

 

 

  Further information 

 

More information, application examples, frequently asked questions (FAQ) can be found on the product 
page: 

https://andino.systems/andino-gateway/andino-gateway-raspberry-pi-router-board

 

Содержание Andino









Отзывы: