background image

11

 

T-Desk Reference Manual

 

     

BaseStation Modes

T

he BaseStation operational mode is related to the number of BeltStations that are in use.  Please reference the 

Tempest

2400/900 Wireless Reference Manual

 for more information on Operational Modes.

 

y

Normal

 - standard operating mode; can support up to five BeltStations only. 

 

y

Shared Mode

 - operates strictly in Shared mode; can support an unlimited number of BeltStations operating as “

Multi-

channel 

shared”.

 

y

Split Mode

 - operates in both Normal and Shared mode; can support up to four BeltStations operating as Normal and an 

unlimited number of BeltStations operating as “

Single Channel S

hared”.

Echo Cancellation

T

his feature is used to aid in eliminating echo created when a 2-Wire 

and a 4-Wire 

intercom system is connected to the Tem

-

pest Wireless system.  When connected, you will have the option to Enable or Disable; however, when not connected, this 
feature is not applicable.

Menu Lock Key

This is the 3-digit security key required to unlock the Menu Lock feature.

Radio Configuration

Proper configuration of the radio is critical for optimal performance of the Tempest Wireless system.    Failure to operate in the 
proper frequency band can have significant legal implications.  The Radio Configuration information should never be changed 
during normal operation.

Radio Band

For the Tempest2400 system, this window displays the selected BaseStation’s frequency band information.

Firmware Versions

T

his information can be useful during times of technical support, or when determining if a firmware upgrade is needed.  

Note:  

This is only the BaseStation firmware, not the corresponding BeltStations.  You must go into the BeltStation menu to view the firmware.

Hardware Versions

This information is for technical support only.

LAN Information

T

he information relating to the Local Area Network (LAN) settings is normally obtained automatically when using a router or 

switch device.  These IP addresses are key when using T-Desk with Tempest Wireless.

Содержание T-Desk
























Отзывы: