Clear-Com RS-602, Инструкция по эксплуатации

Страница: 38 / 56

3 6
R S - 6 0 2 / 6 2 2 B E L T P A C K
Split-ear Headset (RS-622 only), Function 9
Normally, channel A audio goes to the right earphone of a headset and
channel B audio goes to the left earphone.
When set to “on,” this function sends audio from both channels A and
B to each earphone.
Note : This feature applies only to the RS-622 model.
To select “split-ear headset” for a channel:
1. Press and hold the setup button until the setup information
window displays a “P” and then release the button.
2. Repeatedly press the Call A button until “9” appears in the display.
3. Press the Talk A button to toggle “split-ear headset” either on or
off.
• A beltpack’s talk lights reveal the function’s status. If both talk
lights are on, “split-ear headset” is on; if both talk lights are off,
“split-ear headset” is off for that channel.
• The split-ear headset option affects both channels.
4. When you have made your selections, press the setup button to save
them and to exit setup, or press the Call A button to select other
functions to program.
If you do not press a button within five seconds, the beltpack exits the
setup program without making any changes.