Clear-Com RS-602, Инструкция по эксплуатации

Страница: 13 / 56

9
R S - 6 0 2 / 6 2 2 B E L T P A C K
Note: Depending on the type and length of cables attached
to the beltpack, crosstalk between cables may cause both
channels to indicate a 20 kHz AC call signal that is sent on
only one channel.
Volume-Control Knob, Channel A
The volume-control knob for channel A adjusts the
incoming volume level (“listen level”) for that channel.
There is a limiter built into the beltpack circuitry to
prevent incoming volume from exceeding a safe level.
You can suspend this limit with the V-Pack software.
The volume A control knob also adjusts the mic gain
(either main or auxiliary). Refer to the chapter
“Customizing Your Beltpack” for more information.
Volume-Control Knob, Channel B
The volume-control knob for channel B adjusts the
incoming volume level (“listen level”) for that channel
There is a limiter built into the beltpack circuitry to
prevent incoming volume from exceeding a safe level.
You can suspend this limit with the V-Pack software.
5
6